+ Reply to Thread
Results 1 to 2 of 2

Thread: Topcoat not setting

  1. #1
    Junior Member
    Join Date
    May 2018
    Posts
    1

    Topcoat not setting

    My topcoat isn't going off at all, i can only guess at is a mistake somewhere and an inadequate amount of activator. Thought of putting activator into and atomiser and spraying area (about 2.5 sq meteres in a roof valley) and then rollering it again. Advice would be very welcome!

  2. #2
    Super Moderator Alex's Avatar
    Join Date
    May 2011
    Location
    CFS, weekdays, 9-5
    Posts
    216
    You wont have much luck, the catalyst has to be mixed in throughout the topcoat to cure properly. You will need to remove and start again, sorry.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts